2026 Alternatives Guide

Best Bill360 Alternatives in 2026 (Migrate Before the December 1 Shutdown)

By Alex WilliamsUpdated November 18, 202610 tools comparedVerified G2 and Capterra ratings
Top picks for 2026G2 rating
1
CentimeTop pick
Replacing AR + payments and consolidating on the ERP
4.5
2
BILL
SMB AR and AP with payments (not Bill360)
4.4
3
Versapay
Collaborative AR and payment acceptance
4.1
4
Paystand
B2B AR with a payment network
4.4
See all 10 tools compared

Centime is the best overall alternative to Bill360 for finance teams that need to move before the shutdown.Bill360 is closing on December 1, 2026, so if you use it for accounts receivable and payments, you have to stand up a replacement for invoicing, collections, and card and ACH acceptance before you lose access. Centime covers all three, adds compliant surcharging, and most customers are live in 7 to 21 days, which fits the window you have.

This guide compares the best Bill360 alternatives for a finance team, with a focus on a smooth migration off a platform that is going dark. It runs through what Bill360 did, what changes on December 1, the ten alternatives worth considering, and the exact steps to migrate your AR and payments before the cutoff. Centime brings automated invoicing and collections and card and ACH payment acceptance onto one platform, connected to your ERP.

Key takeaways (TL;DR)

Who Bill360 was for

small and mid-sized B2B companies that used it for AR automation, digital invoicing, and embedded card and ACH payments, synced to QuickBooks or Xero.

Why you need a Bill360 alternative now

Bill360 ceases operations on December 1, 2026, per its November 9 customer notice. After that date you cannot log in, process card or ACH payments, or sync your accounting system, and it works only through November 30.

Best overall alternative

Centime, which replaces both Bill360 jobs, AR invoicing and collections plus card and ACH acceptance with surcharging, and goes live in 7 to 21 days with a dedicated specialist.

What sets Centime apart

it is the only option here that pairs AR and payment acceptance with connected AP and a 13-week cash forecast inside your ERP, so you replace Bill360 and consolidate at the same time.

How to choose

weigh migration speed before December 1, whether the tool does both invoicing and card/ACH acceptance, and how it reconnects to QuickBooks, Xero, or your ERP.

Top Bill360 alternatives in 2026 at a glance

Each vendor's full G2 and Capterra scores sit inside its review below. This table covers what each tool is best for and its core strengths and trade-offs for teams replacing Bill360.

ToolBest forKey featuresProsCons
CentimeReplacing AR + payments and consolidating on the ERPAR, card/ACH acceptance, surcharging, AP, cash forecastReplaces both Bill360 jobs; 7-21 day go-live; ERP-nativeUS mid-market focus, demo-led
BILLSMB AR and AP with payments (not Bill360)Invoicing, reminders, customer and vendor paymentsBig brand, AP plus AR, QuickBooks linksLight AR automation vs specialists, 4.1 Capterra
VersapayCollaborative AR and payment acceptanceShared portal, acceptance, cash applicationCollaborative AR model, ERP linksAR only, lower support scores
PaystandB2B AR with a payment networkZero-fee network, NetSuite autopay, cash appZero transaction fees, NetSuite autopayAR/payments focus, implementation friction
InvoicedAR automation and billing with paymentsAR automation, billing, portal, online paymentsEasy to use, billing plus ARSmall-business skew, lighter complex AR
MelioSMB invoicing and get-paidInvoicing, ACH and card acceptance, QuickBooks syncSimple, low cost to startSMB focus, light for mid-market
QuickBooks PaymentsNative acceptance inside QuickBooksCard and ACH on invoices, auto-matchNative to QuickBooks, simpleQuickBooks-bound, basic AR, higher rates
EBizChargeAR payments and surcharging with QuickBooks/ERPCard/ACH processing, surcharging, ERP syncStrong surcharging and ERP acceptanceProcessor-first, not full AR automation
StaxFlat-rate processing with invoicingSubscription-rate processing, invoicing, linksFlat-rate economics at volumeProcessor-first, not AR automation
ChaserAR collections and remindersAutomated chasing, payer-risk, portalStrong, affordable chasingAR collections only, no card acceptance

Why you need a Bill360 alternative now

What Bill360 did well

Bill360 was an accounts receivable automation and embedded B2B payments platform, based in Tampa, Florida, and built for small and mid-sized B2B companies. It handled digital invoicing, customer collaboration, automated card and ACH payments, automatic reconciliation, and surcharging on commercial card transactions, and it synced with QuickBooks and Xero. For an SMB that wanted to send invoices and get paid in one tool, it did that job.

Those are the capabilities a replacement has to cover: invoicing, collections, and card and ACH acceptance, all connected to the accounting system. Any good Bill360 alternative has to do at least that much, and ideally reconnect to QuickBooks or Xero without manual rekeying.

Where Bill360 falls short: it is shutting down on December 1

The decisive reason to look at alternatives to Bill360 is that it is closing. According to Bill360's notice to customers dated November 9, 2026, the company ceases operations on December 1, 2026. After that date, customers can no longer log in, process card or ACH payments, or sync data with their accounting systems such as QuickBooks or Xero, and the platform works only through November 30.

Two details make the timeline tight. The notice gave finance teams roughly three weeks to move their invoicing and payment processing, and customers' saved payment methods sit with Bill360, so you should plan as though stored cards and bank details cannot move with you. That means a replacement is not optional and the migration has a hard deadline, which is why this guide weighs speed as heavily as features.

Best Bill360 alternative overall

Centime is the best overall alternative to Bill360 because it replaces both jobs Bill360 did and does so within the window you have. It runs AR invoicing and collections, accepts card and ACH payments with compliant surcharging through a customer payment portal, and applies and reconciles payments in your ERP. Most customers are live in 7 to 21 days with a dedicated specialist, which is the kind of timeline a December 1 cutoff demands.

It also goes further than Bill360 did. Centime connects AR to AP and a 13-week cash forecast on one platform, so replacing Bill360 is also a chance to consolidate. JobGet ran its AR and customer payment portal in Centime on QuickBooks Online, with 30 to 50 percent of invited customers adopting the portal. If you want a single move that covers invoicing, collections, and payments before the shutdown, Centime is the strongest fit.

Best Bill360 alternatives: in-depth review and comparison

1. CentimeOur top pick

Best for: Replacing AR + payments and consolidating on the ERP

4.5Capterra4.5G2

Overview

Centime is a finance automation platform that runs accounts receivable, accounts payable, a 13-week cash forecast, and expense management on one platform embedded in the ERP a company already uses. On the AR side, it sends invoices, automates collections, accepts card and ACH payments with surcharging, and applies cash in the ledger. It was founded by BC Krishna, who earlier founded MineralTree, and it targets US mid-market finance teams that want to replace a point tool and consolidate at the same time.

Centime Receivables unpaid invoices view with an AR aging graph, days past due, expected payment dates, and collection workflows
Centime Receivables: AR aging, days past due, expected pay dates, and the collection workflow on every invoice.

Ideal for

  • Bill360 users who need AR invoicing, collections, and card/ACH acceptance replaced before December 1
  • US finance teams on QuickBooks, NetSuite, Sage Intacct, or Dynamics 365 Business Central
  • Teams that want to consolidate AR, AP, and cash on one platform, not just swap one tool for another

Top features

  • AR invoicing and collections with automated, cadenced reminders and a self-service customer portal for payment.
  • Card and ACH acceptance, with compliant surcharging applied by state rule, plus automatic payment reconciliation in the ERP.
  • Connected AP and a 13-week cash forecast, so money in, money out, and the forecast share one data set.
  • Native two-way ERP sync and a dedicated onboarding specialist, with most customers live in 7 to 21 days.

Why we're the best Bill360 alternative

Bill360 did invoicing plus payments; Centime does invoicing, collections, and card and ACH acceptance with surcharging, then connects it to AP and cash in the ERP. For a team facing a hard cutoff, the 7 to 21 day onboarding and the dedicated specialist matter as much as the feature match, because the replacement has to be running before December 1.

Pros

  • Replaces both Bill360 jobs, AR and card/ACH payments, on one platform
  • Compliant surcharging and cash application built in, like Bill360's payments side
  • 7 to 21 day onboarding with a dedicated specialist, suited to the migration window
  • Connects AR to AP and a 13-week cash forecast, so you consolidate while you switch

Cons

  • Built for US mid-market finance, not the smallest micro-businesses
  • Demo-led, so onboarding starts with a call rather than instant self-serve signup
  • Saved customer payment methods held by Bill360 are re-collected, not imported (a Bill360 limitation, not Centime's)

Pricing

Consumption-based and custom-quoted by volume, with unlimited users included, plus interchange-plus merchant processing for card and ACH acceptance. AR can be bought on its own or with AP, through a demo and custom quote.

What reviewers say

Centime holds a rating of 4.5 on G2 and 4.5 on Capterra, and is a G2 Mid-Market Leader. Reviewers most often praise the connected AR and AP, the cash visibility, and a responsive Customer Success Manager, which is the kind of support a time-boxed migration needs.

Final verdict

Centime is the strongest Bill360 alternative for US finance teams that want to replace AR and payments and consolidate onto their ERP, with an onboarding timeline that fits the December 1 deadline.

2. BILL

Best for: SMB AR and AP with payments (not Bill360)

4.1Capterra4.4G2

Overview

BILL, formerly Bill.com, is a widely used AP and AR tool for small and midsize businesses, covering invoicing, reminders, and customer and vendor payments with a tight QuickBooks link. Despite the similar name, it is not Bill360 and is a separate, active company. For a Bill360 user, it covers the AR and payments basics in a familiar tool.

Ideal for

  • Small and lighter mid-market teams on QuickBooks or Xero
  • Teams that want AP and AR in one familiar tool
  • Domestic invoicing and payments with light collections

Top features

  • AR invoicing and reminders
  • Customer and vendor payments
  • AP invoice capture and approvals

Why it's a strong Bill360 alternative

BILL is one of the strongest choices for an SMB that wants proven, familiar AR and AP in one tool, with broad QuickBooks support, as a Bill360 replacement.

Pros

  • Large brand and installed base
  • Covers AR and AP
  • Simple setup and QuickBooks sync

Cons

  • Easily confused with Bill360; they are different companies
  • Light AR automation versus collections specialists
  • Per-user and transaction costs climb
  • A 2.1 Trustpilot score, with reviewers citing payment holds

Pricing

Per-user pricing tiers for AP and AR, with higher volumes quoted. A free trial is available.

What reviewers say

BILL is rated 4.4 on G2 and 4.1 on Capterra. Reviewers praise ease of use and QuickBooks sync, while critiques cite sync reliability and payment delays. The Centime vs BILL comparison covers the difference.

Final verdict

BILL is recommended for SMBs that want familiar AR and AP in one tool. For AR connected to AP and a cash forecast on your ERP, it is lighter than Centime, and it should not be confused with Bill360.

3. Versapay

Best for: Collaborative AR and payment acceptance

4.4Capterra4.1G2

Overview

Versapay is a collaborative accounts receivable product built around a shared portal where buyers and sellers resolve invoices together, with payment acceptance and cash application. For a Bill360 user, it covers invoicing, acceptance, and collections with a collaboration angle.

Ideal for

  • Mid-market AR teams with heavy buyer back-and-forth
  • Companies that want collaborative collections plus acceptance
  • Teams on NetSuite, Sage Intacct, or Dynamics

Top features

  • Shared buyer-seller portal
  • Payment acceptance and cash application
  • Established ERP integrations

Why it's a strong Bill360 alternative

Versapay is one of the strongest choices when the priority is collaborative collections with payment acceptance, a broader AR tool than Bill360's SMB invoicing.

Pros

  • Distinctive collaborative AR portal
  • Payment acceptance and cash application
  • Established ERP integrations

Cons

  • AR only, with no connected AP or cash forecast
  • Lower satisfaction and support scores than peers
  • Some reviewers cite fee changes after renewal
  • Heavier than a small-business invoicing tool

Pricing

Custom pricing quoted directly, with no public tiers.

What reviewers say

Versapay carries a 4.1 on G2 and a 4.4 on Capterra. Reviewers praise the collaborative portal, while critiques cite support and post-renewal fees. The Centime vs Versapay comparison covers the fit.

Final verdict

Versapay is recommended for mid-market teams that want collaborative AR with acceptance. For a small Bill360 user, it may be more than the job needs, and it does not connect to AP and cash.

4. Paystand

Best for: B2B AR with a payment network

4.5Capterra4.4G2

Overview

Paystand is a B2B AR and payments product built around a zero-fee payment network and NetSuite autopay, focused on accelerating receivables and cutting card costs. For a Bill360 user, it covers invoicing, acceptance, and reconciliation with a fee-reduction angle.

Ideal for

  • B2B teams focused on receivables and acceptance
  • NetSuite users that want autopay and reconciliation
  • Companies trying to cut card processing fees

Top features

  • Zero-fee B2B payment network
  • AR automation and digital acceptance
  • NetSuite autopay and reconciliation

Why it's a strong Bill360 alternative

Paystand is one of the smartest choices when the priority is receivables acceleration and reducing transaction fees, a different payments model from Bill360.

Pros

  • Zero transaction fees on its network
  • NetSuite autopay and reconciliation
  • AR acceleration and digital acceptance

Cons

  • AR and payments focus, with no connected AP or forecast
  • Reviewers cite implementation timelines and support
  • Network adoption depends on your customers
  • Fit is strongest on NetSuite

Pricing

Subscription model with zero transaction fees, quoted directly, with no public entry rate.

What reviewers say

Paystand is rated 4.4 on G2 and 4.5 on Capterra. Reviewers praise zero fees and NetSuite integration, while critiques cite implementation timelines, which matters against a December deadline.

Final verdict

Paystand is recommended for B2B teams focused on receivables and cutting fees. For a fast migration before December 1, confirm its implementation timeline fits your window.

5. Invoiced

Best for: AR automation and billing with payments

4.7Capterra4.5G2

Overview

Invoiced is an accounts receivable automation and billing product with a customer portal, recurring billing, online payments, and collections chasing, used mostly by smaller and subscription-billing teams. For a Bill360 user, it is a close match on invoicing plus online payments.

Ideal for

  • Smaller and subscription-billing teams
  • Businesses that need a customer portal and online payments
  • Teams replacing manual invoicing and reminders

Top features

  • AR automation and recurring billing
  • Customer portal with online payments
  • Automated reminders and collections

Why it's a strong Bill360 alternative

Invoiced is one of the smartest choices for a smaller team that wants AR automation and billing with online payments in an easy-to-use tool, close to what Bill360 offered.

Pros

  • Easy to use, with strong small-business ratings
  • Billing plus AR automation
  • Customer portal and online payments

Cons

  • Small-business skew, lighter for complex AR
  • No connected AP or cash forecast
  • Less payments-economics depth than a processor
  • Limited fit for enterprise volume

Pricing

Custom pricing with no public tiers; quote-based.

What reviewers say

Invoiced is rated 4.5 on G2 and 4.7 on Capterra. Reviewers praise ease of use and payments. The Centime vs Invoiced comparison covers the detail.

Final verdict

Invoiced is recommended for smaller teams that want AR and billing with online payments. For AR connected to AP and cash, it is lighter than Centime.

6. Melio

Best for: SMB invoicing and get-paid

4.2Capterra4.4G2

Overview

Melio is an SMB payments product that lets small businesses send and receive payments by ACH and card, with invoicing and a QuickBooks sync. For a Bill360 user, it covers the get-paid basics at a low entry cost.

Ideal for

  • Small businesses that want simple invoicing and acceptance
  • Teams that want low-cost ACH payments
  • QuickBooks users with light AR

Top features

  • Invoicing and get-paid links
  • ACH and card acceptance
  • QuickBooks sync

Why it's a strong Bill360 alternative

Melio is one of the smartest choices for a very small business that wants simple invoicing and payment acceptance without a broader AR tool.

Pros

  • Simple and low cost to start
  • ACH and card acceptance
  • QuickBooks sync

Cons

  • SMB focus, light for mid-market AR
  • No deep collections or cash forecast
  • Limited ERP depth beyond QuickBooks
  • Not built for complex AR

Pricing

Free to start, with fees on certain payment methods and faster options. Confirm current pricing on Melio's site.

What reviewers say

Melio is rated 4.4 on G2 and 4.2 on Capterra. Reviewers praise simplicity and free ACH, while critiques cite payment delays and support at scale.

Final verdict

Melio is recommended for very small businesses that want simple invoicing and acceptance. For mid-market AR connected to cash, it is lighter than Centime.

7. QuickBooks Payments

Best for: Native acceptance inside QuickBooks

4.3Capterra4.1G2

Overview

QuickBooks Payments, listed as QuickBooks Money on Capterra, is Intuit's native payment-acceptance feature inside QuickBooks, letting businesses accept card and ACH payments on invoices and auto-match them. For a Bill360 user already on QuickBooks, it is the built-in acceptance option.

Ideal for

  • Small businesses already on QuickBooks
  • Teams that want acceptance with no extra integration
  • Companies with basic AR needs

Top features

  • Card and ACH acceptance on invoices
  • Automatic matching in QuickBooks
  • Recurring payments

Why it's a strong Bill360 alternative

QuickBooks Payments is one of the smartest choices for a small business already in QuickBooks that wants simple acceptance without adding a separate tool, after Bill360.

Pros

  • Native to QuickBooks, simple setup
  • Automatic reconciliation in the books
  • Familiar to QuickBooks users

Cons

  • QuickBooks-bound, with no cross-ERP reach
  • Basic AR, with no collections depth or cash forecast
  • Higher published rates than some processors
  • Not built for mid-market complexity

Pricing

Per-transaction rates by payment type, published by Intuit. No separate platform fee for QuickBooks users.

What reviewers say

QuickBooks Payments is rated 4.1 on G2 and 4.3 on Capterra, where it is listed as QuickBooks Money. Reviewers praise the native QuickBooks tie, while critiques cite rates and support.

Final verdict

QuickBooks Payments is recommended for small QuickBooks businesses that want simple native acceptance. For AR connected to collections, AP, and cash across ERPs, it is far lighter than Centime.

8. EBizCharge

Best for: AR payments and surcharging with QuickBooks/ERP

4.4Capterra4.8G2

Overview

EBizCharge is an integrated payment processor that embeds card and ACH acceptance inside ERPs and accounting systems, with a customer payment portal and surcharging. For a Bill360 user, it is a close match on the payments-and-surcharging side.

Ideal for

  • Businesses focused on card and ACH acceptance
  • Teams that need compliant surcharging
  • QuickBooks and ERP users wanting embedded payments

Top features

  • Card and ACH processing
  • Surcharging and Level 2/3 optimization
  • Customer payment portal and ERP sync

Why it's a strong Bill360 alternative

EBizCharge is one of the strongest choices when the priority is payment acceptance and surcharging inside the accounting system, close to Bill360's payments side.

Pros

  • Strong payment acceptance and surcharging
  • Customer portal and ERP sync
  • Reduces card processing costs

Cons

  • Processor-first, not full AR automation
  • Lighter collections workflows than AR specialists
  • No connected AP or cash forecast
  • Setup varies by ERP

Pricing

Custom pricing by processing volume, quoted directly.

What reviewers say

EBizCharge is rated 4.8 on G2 and 4.4 on Capterra. Reviewers praise the ERP acceptance and support. One note: Centime customer Sanara MedTech switched from EBizCharge to Centime for compliant surcharging inside NetSuite.

Final verdict

EBizCharge is recommended for teams whose priority is payment acceptance and surcharging. For invoicing, collections, AP, and a cash forecast alongside payments, it covers one side where Centime covers both.

9. Stax

Best for: Flat-rate processing with invoicing

4.2Capterra4.9G2

Overview

Stax (formerly Fattmerchant) is a merchant-services provider built around flat-rate, subscription-style processing, with invoicing and payment links. For a Bill360 user, it covers acceptance and invoicing with a processing-economics angle.

Ideal for

  • SMBs with higher processing volume
  • Businesses that prefer subscription-rate pricing
  • Teams that want invoicing and acceptance

Top features

  • Subscription-rate processing (interchange plus a flat fee)
  • Invoicing and payment links
  • In-person and online acceptance

Why it's a strong Bill360 alternative

Stax is one of the smartest choices when the priority is processing economics at volume, with a flat-rate model, as a Bill360 payments replacement.

Pros

  • Flat-rate pricing can save at higher volume
  • In-person and online acceptance
  • Invoicing tools

Cons

  • Processor-first, not AR automation or collections
  • No AP or cash forecast
  • Flat monthly fee can cost more at low volume
  • Not an ERP-embedded AR tool

Pricing

Subscription-style pricing: a flat monthly fee plus interchange. Confirm current rates on Stax's site.

What reviewers say

Stax is rated 4.9 on G2 but 4.2 on Capterra, a notable split, so weigh both; reviewers praise flat-rate savings while some cite billing and support issues.

Final verdict

Stax is recommended for SMBs focused on acceptance economics at volume. For invoicing, collections, AP, and cash alongside payments, it is a processor, not an AR platform.

10. Chaser

Best for: AR collections and reminders

4.9Capterra4.3G2

Overview

Chaser is an AR collections and credit-control tool, UK-origin, built around automated invoice chasing with payer-risk prediction and a customer portal. For a Bill360 user, it covers the collections side strongly, though not card acceptance.

Ideal for

  • Teams whose main need is automated chasing
  • Businesses on Xero or QuickBooks
  • Teams that value polished, personalized reminders

Top features

  • Personalized multi-channel chasing
  • Payer-risk prediction
  • Customer payment portal

Why it's a strong Bill360 alternative

Chaser is one of the smartest choices when the priority is affordable, automated collections, though a Bill360 user also replacing card acceptance will need a payments tool alongside it.

Pros

  • Strong, affordable automated chasing
  • Payer-risk prediction
  • Easy to start, Xero-friendly

Cons

  • Collections only, no card/ACH acceptance of Bill360's kind
  • UK-origin, lighter US-ERP depth
  • Capterra score rests on an aging sample
  • No connected AP or cash forecast

Pricing

Revenue-based pricing from about $259 per month, with a free trial. Confirm current rates on Chaser's site.

What reviewers say

Chaser is rated 4.3 on G2 and 4.9 on Capterra, the Capterra score on a base of reviews mostly from 2017 to 2021, so weigh it as aging. Reviewers praise the automated chasing.

Final verdict

Chaser is recommended for teams whose priority is collections. As a Bill360 replacement it covers chasing but not card and ACH acceptance, so it is a partial fit on its own.

How to migrate off Bill360 before December 1

Because Bill360 goes dark on December 1, 2026, the migration has a hard deadline and a few steps that have to happen while you can still log in. Work through these before November 30, when access ends.

Export your historical data

Download transaction histories, payment receipts, and customer records while the portal is still live. After December 1 you cannot log in to retrieve them.

Ask Bill360 about any money it is holding

Confirm what funds are in transit or held, and how and when they will be settled to you.

Pause automated billing

Turn off recurring AutoPay schedules and remove Bill360 payment links from any outstanding invoices, so customers are not sent to a dead portal.

Stand up your replacement AR and payment processor

Set up invoicing, collections, and card and ACH acceptance in the new tool. With Centime, a dedicated specialist runs this, and most customers are live in 7 to 21 days.

Re-collect saved payment methods

Customers' stored cards and bank details sit with Bill360 and should be treated as non-portable, so invite customers to re-enter payment details in the new portal before their next invoice.

Reconnect your accounting system

Link the new tool to QuickBooks, Xero, or your ERP so invoices and payments post again, through a native QuickBooks sync or your ERP's connection.

The order matters: export first while you still have access, then stand up the replacement, then move customers over before their next billing date. Starting now leaves room to test the new setup before Bill360 switches off.

Why Centime works across multiple use cases

Centime for Bill360 users replacing AR and payments at once

A Bill360 replacement has to cover two things that used to live in one tool: sending invoices and collecting, and accepting card and ACH payments. Centime does both, with compliant surcharging on the payments side and automated reminders plus a customer portal on the collections side. CyberMaxx used Centime's AR to raise collections effectiveness 23 percent, and CyberMaxx did it with a lean team, which is the profile of most Bill360 users.

Replacing both jobs in one move is simpler than buying a collections tool and a separate processor, which is the two-vendor path some alternatives on this list require.

Centime for teams that want to consolidate while they switch

Bill360 handled AR and payments; it did not run AP or forecast cash. Centime runs accounts payable automation and a 13-week cash forecast on the same platform as AR, so a forced migration becomes a chance to consolidate tools rather than replace one silo with another.

For a finance leader, that turns an unwelcome deadline into a step forward: one platform for money in, money out, and the cash position, inside the ERP.

Centime for QuickBooks and mid-market ERP teams

Many Bill360 users synced to QuickBooks or Xero. Centime connects natively to QuickBooks, and to NetSuite, Sage Intacct, and Dynamics 365 Business Central with a real-time, two-way connection, so invoices and payments post back without rekeying. FC Cincinnati ran connected AR and AP natively in NetSuite and cut DSO from 106 days to 67.

The native connection is what makes the migration land cleanly, because the accounting system stays the system of record from day one.

What makes a good Bill360 alternative?

It covers both invoicing and card/ACH acceptance

Bill360 did two jobs, invoicing and collections, and card and ACH payment acceptance. A good alternative covers both, so you are not buying two tools to replace one. If a tool only chases invoices or only processes payments, you will need a second one alongside it.

Centime, Versapay, Invoiced, and Paystand cover both sides; Chaser is collections only, and Stax and EBizCharge are acceptance first.

It can go live before December 1

With a hard cutoff, migration speed is a feature. A good alternative has a fast, supported onboarding, ideally with a dedicated person, so the replacement is running before Bill360 switches off. Centime moves most customers live in 7 to 21 days.

Confirm the onboarding timeline against your billing calendar, so the new tool is ready before your next invoice run after December 1.

It reconnects to your accounting system

Bill360 synced with QuickBooks and Xero, and losing that sync is part of what breaks on December 1. A good alternative reconnects to your accounting system, so invoices and payments post again without manual rekeying. For a US mid-market team, native QuickBooks, NetSuite, Sage Intacct, or Dynamics support matters most.

Ask each vendor how it posts to your specific system, and whether the connection is one-way or two-way.

It handles surcharging if you used it

Bill360 offered surcharging on commercial card transactions. If you pass card costs to customers, a good alternative has compliant, state-aware surcharging so you do not lose that on the switch. Centime and EBizCharge both offer it.

If you do not surcharge today, this matters less, but confirm it rather than assume it carries over.

It is a US fit with support you can reach

A migration under deadline needs responsive support. A good alternative is built for the US market and gives you a real person during the switch, not just a help center. Centime assigns a dedicated Client Success Manager, which reviewers cite as a reason the onboarding goes smoothly.

During a forced migration, the quality of onboarding support is as decisive as the feature list.

How to choose the right Bill360 alternative for your needs

Start with your deadline

Bill360 ends on December 1, 2026, so begin with onboarding speed. Rule out any tool that cannot be live before your next billing run after the cutoff, however good its features are.

Match it to what Bill360 did for you

List what you actually used in Bill360, invoicing, collections, card and ACH acceptance, surcharging, QuickBooks or Xero sync, and require the replacement to cover those. Drop nice-to-haves until the core is covered.

Decide one tool or two

If you want one tool for invoicing and payments, look at Centime, Versapay, Invoiced, or Paystand. If you are fine running collections and processing separately, a collections tool plus a processor can work, at the cost of a second vendor.

Check the accounting connection

Confirm how the tool posts to QuickBooks, Xero, or your ERP, and whether it is one-way or two-way. For mid-market teams, native NetSuite, Sage Intacct, or Dynamics support is worth prioritizing.

Plan the customer payment-method move

Because saved cards and bank details sit with Bill360, choose a tool whose customer portal makes it easy for your customers to re-enter payment details, and plan the outreach before their next invoice.

Everything you need to know about Bill360 alternatives

CategoryKey considerations
Top 3 alternativesCentime (AR + payments + surcharging on the ERP), Versapay (collaborative AR), Invoiced (AR and billing with payments)
Best overall optionCentime, which replaces AR invoicing, collections, and card/ACH acceptance and goes live in 7 to 21 days
Why look for Bill360 alternativesBill360 ceases operations December 1, 2026; after that no login, no card/ACH payments, no accounting sync
How to chooseStart with the December 1 deadline, match what Bill360 did, decide one tool or two, check the accounting connection
Price rangeMelio and QuickBooks Payments entry-level; BILL per-user; Centime consumption-based with unlimited users plus interchange-plus
Ease of switchingCentime onboarding runs 7 to 21 days with a dedicated specialist; export Bill360 data before November 30
Must-have featuresInvoicing, collections, card and ACH acceptance, accounting sync, and surcharging if you use it
Mistakes to avoidWaiting past the window, not exporting data, assuming saved payment methods transfer, confusing BILL with Bill360

Ready to move off Bill360? Try Centime

Centime replaces both jobs Bill360 did, AR invoicing and collections plus card and ACH acceptance with compliant surcharging, and connects them to AP and a 13-week cash forecast inside your ERP. Most customers are live in 7 to 21 days with a dedicated specialist, which is the timeline a December 1 cutoff calls for.

It is built for US finance teams that have to migrate off Bill360 and would rather consolidate than replace one silo with another. Book a migration demo and Centime will map your Bill360 setup to a live AR and payments process before the shutdown.

A finance leader smiling in a meeting with a colleague

FAQs about Bill360 alternatives

Is Bill360 shutting down?

Bill360 is shutting down and ceases operations on December 1, 2026, according to its customer notice dated November 9, 2026. After that date, customers can no longer log in, process card or ACH payments, or sync data with accounting systems such as QuickBooks or Xero, and the platform works only through November 30. Bill360 was a Tampa-based AR automation and embedded B2B payments platform for small and mid-sized companies. If you use it, you need a replacement for invoicing and payments before the cutoff.

What are the best Bill360 alternatives in 2026?

The best Bill360 alternatives in 2026 are Centime, BILL, Versapay, Paystand, Invoiced, Melio, QuickBooks Payments, EBizCharge, Stax, and Chaser. Centime is the strongest overall because it replaces both of Bill360's jobs, AR invoicing and collections plus card and ACH acceptance with surcharging, and connects them to AP and a cash forecast in your ERP, with a 7 to 21 day onboarding that fits the December 1 deadline. Versapay, Invoiced, and Paystand also cover invoicing and payments, while Chaser is collections only. The right pick depends on your deadline and whether you want one tool or two.

What is the best Bill360 alternative for a smoother migration?

The best Bill360 alternative for a smoother migration is one that replaces invoicing, collections, and card and ACH acceptance in a single move and can go live before December 1, which is why Centime leads here. Centime assigns a dedicated onboarding specialist and moves most customers live in 7 to 21 days, and it reconnects natively to QuickBooks and to NetSuite, Sage Intacct, and Dynamics 365. Replacing one tool instead of stitching together a collections tool and a processor keeps the migration simpler. Start by exporting your Bill360 data before November 30.

What features should I look for in a Bill360 alternative?

A Bill360 alternative should cover both invoicing and collections and card and ACH acceptance, reconnect to your accounting system, and go live before December 1. If you pass card costs to customers, it should also offer compliant surcharging, which Centime and EBizCharge provide. For US mid-market teams, native QuickBooks, NetSuite, Sage Intacct, or Dynamics support matters most. Match the tool to what you actually used in Bill360, then weigh onboarding speed against your billing calendar.

Is it easy to switch from Bill360 to an alternative?

Switching from Bill360 to an alternative is realistic before the December 1 deadline if you start now, and Centime moves most customers live in 7 to 21 days with a dedicated specialist. Export your transaction history, receipts, and customer records before November 30, pause AutoPay and remove Bill360 payment links, then stand up the replacement and reconnect your accounting system. Because saved payment methods sit with Bill360, plan to have customers re-enter card and bank details in the new portal. The order is export first, then replace, then move customers over.

Is BILL the same as Bill360?

BILL is not the same as Bill360, despite the similar name. BILL, formerly Bill.com, is a separate, active AP and AR company for small and midsize businesses, while Bill360 is the Tampa-based AR and payments platform that ceases operations on December 1, 2026. BILL is one alternative a Bill360 user can consider, alongside Centime and others. Confirm you are evaluating the right company, because the names are easy to confuse.

What is the main difference between Centime and Bill360?

The main difference between Centime and Bill360 is scope and status: Bill360 did SMB AR invoicing and embedded payments and is shutting down on December 1, 2026, while Centime runs AR, AP, a 13-week cash forecast, and expense management as an active, ERP-native platform. Centime covers both of Bill360's jobs, invoicing and collections plus card and ACH acceptance with surcharging, and adds AP and cash forecasting. For a team migrating off Bill360, that means replacing the tool and consolidating in one move.

What are the top competitors of Bill360 in AR and AP automation software?

The top competitors of Bill360 in AR automation software are Centime, Versapay, Invoiced, Paystand, and Chaser, since Bill360 was an AR and payments platform. In AP automation software the comparison shifts to Centime and BILL, because Bill360 focused on receivables and payments rather than payables. Centime appears in both because it connects AR and AP on one ERP-native platform, which Bill360 did not. For a team that wants to replace Bill360 and add AP, a connected platform covers both.

What should I do with saved customer payment methods when Bill360 shuts down?

When Bill360 shuts down, treat saved customer payment methods as non-portable, because customers' stored cards and bank details sit with Bill360 rather than with you. Before December 1, stand up your replacement AR and payment tool and invite customers to re-enter their payment details in the new portal ahead of their next invoice. Remove Bill360 payment links from any outstanding invoices so customers are not sent to a portal that is going offline. Planning this outreach early avoids a gap in getting paid after the cutoff.